Do-It-Yourself Projects to Get You Off the Grid by Instructables.com Noah Weinstein

Author:Instructables.com,Noah Weinstein
Language: eng
Format: epub
ISBN: 9781510738461
Publisher: Perseus Books, LLC
Published: 2018-02-17T16:00:00+00:00

4. Start where Line A intersects Line B. Going left around Line B, make a mark at every 145 mm. The last section should be about 115 mm.

5. Start where Line A intersects Line C. Going right around Line C, make a mark at every 145 mm. The last section should be about 115 mm.

6. Mark each line using a straight edge.

7. Cut along these lines, using the jigsaw, so that you have four strips of 145 mm and one strip about 115 mm.

8. Take each strip and place them with the inside of the pipe facing down.

9. Make a mark at one end of each strip 115 mm from the left edge.

10. Make a mark at the other end of each strip 30 mm from the left edge.

11. Mark and cut these lines, using the jigsaw.

12. Place each blade with the inside of the pipe facing down.

13. Make a mark along the angled line of the blade, 3 inches from the wide end.

14. Make another mark on the wide end of the blade, one inch from the straight edge.

15. Connect these two marks and cut along the line. This prevents the blades from interfering with the others’ wind.

Download

Copyright Disclaimer:
This site does not store any files on its server. We only index and link to content provided by other sites. Please contact the content providers to delete copyright contents if any and email us, we'll remove relevant links or contents immediately.